57mm Diameter Oldham, Hub Only
Item number:
Description:
Oldham couplings are easy to use 3-part couplings utilizing wear discs providing generous radial compensation. The discs are the sacrificial elements and are replaceable at low cost in the event of wear or breakage. The 4 hub styles and 2 disc materials that comprise the range are fully interchangeable within each of the 9 sizes available. This part is the hub only, a complete coupling consists of two hubs and a torque disc.
Select bore(s) before adding to cart (prices will change if keyways are selected).
Bore 1
Part #:
Technical Specifications
Coupling Type
Oldham Hub
Configuration
Thro Bore
Size
57
Material
Aluminium
Max Bore B1 (in)
1.181
Max Bore B1 (mm)
30
Min Bore B1 (in)
0.472
Min Bore B1 (mm)
12
Angular Compensation, Max (degrees)
0.5
Axial Compensation, Max (in)
+/- 0.008
Axial Compensation, Max (mm)
+/- 0.20
Bore Tolerance (in)
+0.0012 / -0.0000
Bore Tolerance (mm)
+0.03 / -0.00
Fastener Screw Size
M6
Fastener Screw Torque (lb-in)
171
Fastener Screw Torque (Nm)
19.34
Fastener Wrench Size (mm)
5
Max Speed (rpm)
3000
Operating Temperature (°C)
-20 to +60
Operating Temperature (°F)
-20 to +140
Peak Torque (lb-in)
389
Peak Torque (Nm)
44
Radial Compensation, Max (in)
0.01
Radial Compensation, Max (mm)
0.25
Resists Axial Load
No
Shaft Connection
Clamp
Static Break Torque (lb-in)
1328
Static Break Torque (Nm)
150
Torsional Rate (deg/lb-in)
0.002
Torsional Rate (deg/Nm)
0.022
Torsional Stiffness (lb-in/rad)
23100
Torsional Stiffness (Nm/rad)
2610
Mass (Weight) (g)
180
Mass (Weight) (oz)
6.4
[D] Outside Diameter (in)
2.25
[D] Outside Diameter (mm)
57.1
L1 Dimension (in)
1.12
L1 Dimension (mm)
28.4
L2 Dimension (in)
0.83
L2 Dimension (mm)
21.2
[L] Assembled Length (in)
3.07
[L] Assembled Length (mm)
78
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.