19mm Diameter Oldham, Hub Only
Item number:
Description:
Oldham couplings are easy to use 3-part couplings utilizing wear discs providing generous radial compensation. The discs are the sacrificial elements and are replaceable at low cost in the event of wear or breakage. The 4 hub styles and 2 disc materials that comprise the range are fully interchangeable within each of the 9 sizes available. This part is the hub only, a complete coupling consists of two hubs and a torque disc.
Technical Specifications
Coupling Type
Oldham Hub
Configuration
No Bore
Size
19
Material
Aluminium
Angular Compensation, Max (degrees)
0.5
Axial Compensation, Max (in)
+/- 0.004
Axial Compensation, Max (mm)
+/- 0.10
Max Speed (rpm)
3000
Operating Temperature (°C)
-20 to +60
Operating Temperature (°F)
-20 to +140
Peak Torque (lb-in)
15
Peak Torque (Nm)
1.7
Radial Compensation, Max (in)
0.008
Radial Compensation, Max (mm)
0.2
Resists Axial Load
No
Static Break Torque (lb-in)
88.5
Static Break Torque (Nm)
10
Torsional Rate (deg/lb-in)
0.056
Torsional Rate (deg/Nm)
0.5
Torsional Stiffness (lb-in/rad)
1018
Torsional Stiffness (Nm/rad)
115
Mass (Weight) (g)
7.1
Mass (Weight) (oz)
0.25
[D] Outside Diameter (in)
0.75
[D] Outside Diameter (mm)
19.1
L1 Dimension (in)
0.25
L1 Dimension (mm)
6.3
L2 Dimension (in)
0.37
L2 Dimension (mm)
9.4
[L] Assembled Length (in)
0.87
[L] Assembled Length (mm)
22
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.