13mm Diameter Oldham, Hub Only
Item number:
Description:
Oldham couplings are easy to use 3-part couplings utilizing wear discs providing generous radial compensation. The discs are the sacrificial elements and are replaceable at low cost in the event of wear or breakage. The 4 hub styles and 2 disc materials that comprise the range are fully interchangeable within each of the 9 sizes available. This part is the hub only, a complete coupling consists of two hubs and a torque disc.
Technical Specifications
Coupling Type
Oldham Hub
Configuration
No Bore
Size
13
Material
Brass
Angular Compensation, Max (degrees)
0.5
Axial Compensation, Max (in)
+/- 0.002
Axial Compensation, Max (mm)
+/- 0.05
Max Speed (rpm)
3000
Operating Temperature (°C)
-20 to +60
Operating Temperature (°F)
-20 to +140
Peak Torque (lb-in)
4.43
Peak Torque (Nm)
0.5
Radial Compensation, Max (in)
0.004
Radial Compensation, Max (mm)
0.1
Resists Axial Load
No
Static Break Torque (lb-in)
35.4
Static Break Torque (Nm)
4
Torsional Rate (deg/lb-in)
0.099
Torsional Rate (deg/Nm)
0.88
Torsional Stiffness (lb-in/rad)
575
Torsional Stiffness (Nm/rad)
65
Mass (Weight) (g)
6.7
Mass (Weight) (oz)
0.24
[D] Outside Diameter (in)
0.5
[D] Outside Diameter (mm)
12.7
L1 Dimension (in)
0.17
L1 Dimension (mm)
4.3
L2 Dimension (in)
0.29
L2 Dimension (mm)
7.3
[L] Assembled Length (in)
0.63
[L] Assembled Length (mm)
15.9
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.