a
  • a
  • a
  • a
  • a
  • a

816.14

Item number:

Description:

Flexible Jaw Couplings utilize the flexibility and resiliance of a polyurthane element between aluminium hubs. This combination allows high torque to be transmitted with little or no backlash, even where there is significant angular and/or parallel misalignment. This part is the complete coupling consisting of two hubs and a Red element.

Select bore(s) before adding to cart (prices will change if keyways are selected).

Bore 1
Bore 2
Part #:

Technical Specifications

Coupling Type
Flex-G Coupling with hard element
Configuration
Thro Bore
Size
14
Material
Aluminium
Max Bore B1 (in)
0.25
Max Bore B1 (mm)
6.35
Min Bore B1 (in)
0.118
Min Bore B1 (mm)
3
Max Bore B2 (in)
0.25
Max Bore B2 (mm)
6.35
Min Bore B2 (in)
0.118
Min Bore B2 (mm)
3
Angular Compensation, Max (degrees)
2
Axial Compensation, Max (in)
0.004
Axial Compensation, Max (mm)
0.1
Backlash Free Torque (lb-in)
2
Backlash Free Torque (Nm)
0.22
Bore Tolerance (in)
+0.0012 / -0.0000
Bore Tolerance (mm)
+0.03 / -0.00
Fastener Screw Size
M2.5
Fastener Screw Torque (lb-in)
11.7
Fastener Screw Torque (Nm)
1.32
Fastener Wrench Size (mm)
2.5
Max Speed (rpm)
40000
Operating Temperature (°C)
-40 to +100
Operating Temperature (°F)
-40 to +212
Radial Compensation, Max (in)
0.004
Radial Compensation, Max (mm)
0.1
Resists Axial Load
No
Shaft Connection
Clamp
Torque, Max (lb-in)
35
Torque, Max (Nm)
3.8
Torque, Nominal (lb-in)
18
Torque, Nominal (Nm)
1.9
Torsional Rate (deg/lb-in)
0.26
Torsional Rate (deg/Nm)
2.29
Torsional Stiffness (lb-in/rad)
221
Torsional Stiffness (Nm/rad)
25
Mass (Weight) (g)
7
Mass (Weight) (oz)
0.25
[D] Outside Diameter (in)
0.55
[D] Outside Diameter (mm)
14
L1 Dimension (in)
0.28
L1 Dimension (mm)
7
L2 Dimension (in)
0.31
L2 Dimension (mm)
8
[L] Assembled Length (in)
0.87
[L] Assembled Length (mm)
22
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
X
Cookies help us improve your website experience.
By using our website, you agree to our use of cookies.
Confirm