731.32
Item number:
Description:
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Select bore(s) before adding to cart (prices will change if keyways are selected).
Bore 1
Bore 2
Part #:
Technical Specifications
Coupling Type
MultiBeam Coupling
Configuration
6 Beam Relieved Bore
Size
32
Material
Acetal
Max Bore B1 (in)
0.5
Max Bore B1 (mm)
12.7
Min Bore B1 (in)
0.315
Min Bore B1 (mm)
8
Max Bore B2 (in)
0.5
Max Bore B2 (mm)
12.7
Min Bore B2 (in)
0.375
Min Bore B2 (mm)
9.525
Angular Compensation, Max (degrees)
7
Bore Tolerance (in)
+0.0012 / -0.0000
Bore Tolerance (mm)
+0.03 / -0.00
Fastener Screw Size
M4
Fastener Screw Torque (lb-in)
18.9
Fastener Screw Torque (Nm)
2.14
Fastener Wrench Size (mm)
3
Max Speed (rpm)
20000
Operating Temperature (°C)
-40 to +140
Operating Temperature (°F)
-40 to +284
Peak Torque (lb-in)
21.1
Peak Torque (Nm)
2.4
Radial Compensation, Max (in)
0.02
Radial Compensation, Max (mm)
0.5
Resists Axial Load
Yes
Shaft Connection
Clamp
Torsional Stiffness (lb-in/rad)
49.6
Torsional Stiffness (Nm/rad)
5.6
Mass (Weight) (g)
52
Mass (Weight) (oz)
1.9
[D] Outside Diameter (in)
1.25
[D] Outside Diameter (mm)
31.8
L1 Dimension (in)
0.63
L1 Dimension (mm)
16
[L] Length (in)
2.25
[L] Length (mm)
57.2
[L] Overall Length (in)
2.25
[L] Overall Length (mm)
57.2
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.