19mm Diameter 6-Beam Coupling
Item number:
Description:
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Select bore(s) before adding to cart (prices will change if keyways are selected).
Bore 1
Bore 2
Part #:
Technical Specifications
Coupling Type
MultiBeam Coupling
Configuration
6 Beam Relieved Bore
Size
19
Material
Acetal
Max Bore B1 (in)
0.315
Max Bore B1 (mm)
8
Min Bore B1 (in)
0.157
Min Bore B1 (mm)
4
Max Bore B2 (in)
0.315
Max Bore B2 (mm)
8
Min Bore B2 (in)
0.197
Min Bore B2 (mm)
5
Angular Compensation, Max (degrees)
7
Bore Tolerance (in)
+0.0012 / -0.0000
Bore Tolerance (mm)
+0.03 / -0.00
Fastener Screw Size
M4
Fastener Screw Torque (lb-in)
9.29
Fastener Screw Torque (Nm)
1.05
Fastener Wrench Size (mm)
2
Max Speed (rpm)
20000
Operating Temperature (°C)
-40 to +140
Operating Temperature (°F)
-40 to +284
Peak Torque (lb-in)
7.7
Peak Torque (Nm)
0.87
Radial Compensation, Max (in)
0.01
Radial Compensation, Max (mm)
0.25
Resists Axial Load
Yes
Shaft Connection
Set-Screw
Torsional Stiffness (lb-in/rad)
8.9
Torsional Stiffness (Nm/rad)
1
Mass (Weight) (g)
7.8
Mass (Weight) (oz)
0.28
[D] Outside Diameter (in)
0.75
[D] Outside Diameter (mm)
19.1
L1 Dimension (in)
0.26
L1 Dimension (mm)
6.5
[L] Length (in)
1.04
[L] Length (mm)
26.5
[L] Overall Length (in)
1.04
[L] Overall Length (mm)
26.5
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.