19mm Diameter 6-Beam Coupling
Item number:
Description:
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Select bore(s) before adding to cart (prices will change if keyways are selected).
Bore 1
Bore 2
Part #:
Technical Specifications
Coupling Type
MultiBeam Coupling
Configuration
6 Beam Relieved Bore
Size
19
Material
Aluminium
Max Bore B1 (in)
0.394
Max Bore B1 (mm)
10
Min Bore B1 (in)
0.1875
Min Bore B1 (mm)
4.763
Max Bore B2 (in)
0.394
Max Bore B2 (mm)
10
Min Bore B2 (in)
0.197
Min Bore B2 (mm)
5
Angular Compensation, Max (degrees)
7
Bore Tolerance (in)
+0.0012 / -0.0000
Bore Tolerance (mm)
+0.03 / -0.00
Fastener Screw Size
M2.5
Fastener Screw Torque (lb-in)
11.5
Fastener Screw Torque (Nm)
1.3
Fastener Wrench Size (mm)
2
Max Speed (rpm)
25000
Operating Temperature (°C)
-40 to +140
Operating Temperature (°F)
-40 to +284
Peak Torque (lb-in)
26.6
Peak Torque (Nm)
3
Radial Compensation, Max (in)
0.01
Radial Compensation, Max (mm)
0.25
Resists Axial Load
Yes
Shaft Connection
Clamp
Torsional Stiffness (lb-in/rad)
204
Torsional Stiffness (Nm/rad)
23
Mass (Weight) (g)
12.4
Mass (Weight) (oz)
0.44
[D] Outside Diameter (in)
0.75
[D] Outside Diameter (mm)
19.1
L1 Dimension (in)
0.26
L1 Dimension (mm)
6.5
[L] Length (in)
1.04
[L] Length (mm)
26.5
[L] Overall Length (in)
1.04
[L] Overall Length (mm)
26.5
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.