9mm Diameter 6-Beam Coupling
Item number:
Description:
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Select bore(s) before adding to cart (prices will change if keyways are selected).
Bore 1
Bore 2
Part #:
Technical Specifications
Coupling Type
MultiBeam Coupling
Configuration
6 Beam Relieved Bore
Size
09
Material
Aluminium
Max Bore B1 (in)
0.1875
Max Bore B1 (mm)
4.763
Min Bore B1 (in)
0.079
Min Bore B1 (mm)
2
Max Bore B2 (in)
0.1875
Max Bore B2 (mm)
4.763
Min Bore B2 (in)
0.118
Min Bore B2 (mm)
3
Angular Compensation, Max (degrees)
3
Bore Tolerance (in)
+0.0012 / -0.0000
Bore Tolerance (mm)
+0.03 / -0.00
Fastener Screw Size
M2.5
Fastener Screw Torque (lb-in)
4.87
Fastener Screw Torque (Nm)
0.55
Fastener Wrench Size (mm)
1.3
Max Speed (rpm)
30000
Operating Temperature (°C)
-40 to +140
Operating Temperature (°F)
-40 to +284
Peak Torque (lb-in)
5.31
Peak Torque (Nm)
0.6
Radial Compensation, Max (in)
0.005
Radial Compensation, Max (mm)
0.12
Resists Axial Load
Yes
Shaft Connection
Set-Screw
Torsional Stiffness (lb-in/rad)
8
Torsional Stiffness (Nm/rad)
0.9
Mass (Weight) (g)
2.5
Mass (Weight) (oz)
0.09
[D] Outside Diameter (in)
0.37
[D] Outside Diameter (mm)
9.5
L1 Dimension (in)
0.21
L1 Dimension (mm)
5.3
[L] Length (in)
0.77
[L] Length (mm)
19.6
[L] Overall Length (in)
0.77
[L] Overall Length (mm)
19.6
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.