a
  • a
  • a
  • a
  • a
  • a

722.13

Item number:

Description:

These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.

Select bore(s) before adding to cart (prices will change if keyways are selected).

Bore 1
Bore 2
Part #:

Technical Specifications

Configuration
6 Beam Relieved Bore
Size
13
Material
Stainless Steel
Max Bore B1 (in)
0.25
Max Bore B1 (mm)
6.35
Min Bore B1 (in)
0.118
Min Bore B1 (mm)
3
Max Bore B2 (in)
0.25
Max Bore B2 (mm)
6.35
Min Bore B2 (in)
0.157
Min Bore B2 (mm)
4
Angular Compensation, Max (degrees)
5
Bore Tolerance (in)
+0.0012 / -0.0000
Bore Tolerance (mm)
+0.03 / -0.00
Fastener Screw Size
M3
Fastener Screw Torque (lb-in)
2.83
Fastener Screw Torque (Nm)
0.32
Fastener Wrench Size (mm)
1.5
Max Speed (rpm)
25000
Operating Temperature (°C)
-40 to +140
Operating Temperature (°F)
-40 to +284
Peak Torque (lb-in)
16.82
Peak Torque (Nm)
1.9
Radial Compensation, Max (in)
0.007
Radial Compensation, Max (mm)
0.17
Resists Axial Load
Yes
Shaft Connection
Set-Screw
Torsional Stiffness (lb-in/rad)
133
Torsional Stiffness (Nm/rad)
15
Mass (Weight) (g)
15
Mass (Weight) (oz)
0.53
[D] Outside Diameter (in)
0.5
[D] Outside Diameter (mm)
12.7
L1 Dimension (in)
0.26
L1 Dimension (mm)
6.5
[L] Length (in)
1
[L] Length (mm)
25.4
[L] Overall Length (in)
1
[L] Overall Length (mm)
25.4
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.

Literature

X
Cookies help us improve your website experience.
By using our website, you agree to our use of cookies.
Confirm