a
  • a
  • a
  • a
  • a
  • a

710.19

Item number:

Description:

These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.

Select bore(s) before adding to cart (prices will change if keyways are selected).

Bore 1
Bore 2
Part #:

Technical Specifications

Coupling Type
MultiBeam Coupling
Configuration
6 Beam Non-Relieved Bore
Size
19
Material
Acetal
Max Bore B1 (in)
0.375
Max Bore B1 (mm)
9.525
Min Bore B1 (in)
0.157
Min Bore B1 (mm)
4
Max Bore B2 (in)
0.375
Max Bore B2 (mm)
9.525
Min Bore B2 (in)
0.25
Min Bore B2 (mm)
6.35
Angular Compensation, Max (degrees)
7
Bore Tolerance (in)
+0.0012 / -0.0000
Bore Tolerance (mm)
+0.03 / -0.00
Fastener Screw Size
M4
Fastener Screw Torque (lb-in)
9.29
Fastener Screw Torque (Nm)
1.05
Fastener Wrench Size (mm)
2
Max Speed (rpm)
20000
Operating Temperature (°C)
-40 to +140
Operating Temperature (°F)
-40 to +284
Peak Torque (lb-in)
11.5
Peak Torque (Nm)
1.3
Radial Compensation, Max (in)
0.01
Radial Compensation, Max (mm)
0.25
Resists Axial Load
Yes
Shaft Connection
Set-Screw
Torsional Stiffness (lb-in/rad)
23.9
Torsional Stiffness (Nm/rad)
2.7
Mass (Weight) (g)
8
Mass (Weight) (oz)
0.29
[D] Outside Diameter (in)
0.75
[D] Outside Diameter (mm)
19.1
L1 Dimension (in)
0.26
L1 Dimension (mm)
6.5
[L] Length (in)
1.04
[L] Length (mm)
26.5
[L] Overall Length (in)
1.04
[L] Overall Length (mm)
26.5
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
X
Cookies help us improve your website experience.
By using our website, you agree to our use of cookies.
Confirm