Multi-Beam Couplings
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable. The three start helical-cut design provides higher torque capability and greatly reduced wind-up when compared to single beam couplings. The 6 beam version provides greater misalignment capability but reduced torque accuracy when compared to the 3 beam version.
Product Features
- Material Options: Aluminium, Stainless Steel, Acetal
- Speeds: Up to 5000 rpm
- Peak Torque Largest Size lbs.-in (Nm): 1239(140)
- Standard Bores in. (mm): 1/8" -1 1/4" (1 to 38)
- Temperature: -40° to +290°F , (-40° to +140°C)
- Electrically Isolating: Aluminium & Stainless Steel No , Acetal Yes
- Connection: Clamp or Set Screw
- Torsionally rigid design
- Zero backlash
- No moving parts
- Single beam simple coupling compatible with industry standard types
- 3-Beam single stage for increased torsional stiffness
- 6-Beam two stage for torsional stiffness and increased radial compliance
- Step Beam for low inertia, electrical isolation, low cost
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
