Sliding Disc (Oldham)
General purpose, robust, easy to use 3-part couplings with replaceable wear elements. Generous radial compensation and pull-apart / re-engage facility for blind assemblies.
open category

Universal Lateral
Unique, general purpose light duty couplers with generous angular and radial misalignment compensation. Resist axial motion, can anchor unrestricted shafts and perform light push/pull duties.
open category

Multi Beam
General purpose single piece couplers supplied in single stage (3-beam) or two stage (6-beam) versions. Use with caution if low bearing loads are desirable.
open category

Single Beam
Similar to multi-beam but has a single beam only. They therefore have less torsional stiffness but greater radial and angular flexibility than corresponding multi-beam items
open category

Step Beam
Beam coupler with stepped radial slots combining the high torsional stiffness of a straight beam coupler with the lateral flexibility of its helical counterpart
open category

Membrane (disc)
Precision couplers with excellent kinematic properties. Dynamically balanced construction. Single stage versions make up into 'whirl' free cardans. The two stage versions offer short envelopes and low bearing loads respectively.
open category

Stainless Steel Bellows
Precision couplers with excellent kinematic properties. The 3 types offer differing combinations of stiffness, radial compensation and axial motion.
open category

Electrodeposited Nickel Bellows
Manufacture by electrodeposition allows this coupler to provide exceptional integrity of angular position between input and output shafts.
open category

Double-loop
This is a highly flexible type of coupler with exceptional flexibility in all three modes but a resultant lower torsional stiffness.
open category

Miniature Flexible Jaw
High torque transmission with little or no backlash even where there is significant angular and/ or parallel shaft misalignment
open category

Non-Contact Magnetic
Magnetic disc coupler which connects shafts without any direct mechanical contact. Good for systems processing highly volatile liquids or for transferring motion within vacuum chambers without the need for expensive and vulnerable shaft seals
open category

Plastic Universal Joints
Large offset capacity couplers suitable for light duty.
open category

Miniature Friction Clutch
Small, user-adjustable torque limiters for concentric or in-line mounting
open category

Plastic Bevel Gearboxes
Miniaturized right-angle drives with different shaft configurations and components to meet various application and cost demands
open category

Bore Adapters
Huco-Lok bore adapters are a convenient way of adapting a coupler to a variety of shaft diameters, typically at the R & D stage. Brass and aluminum alloy types offered
open category

Jaw Power Couplers

open category

Nylon Sleeve Gear Couplers
Compact, efficient units for transmitting high levels of torque relative to their size and weight. Silent, electrically isolating and maintenance free. Parts available separately for replacement.
open category

Rigid Couplers
Provide reliable holding power and maintain alignment where misalignment compensation is not required
open category